Run for the money payout problem

[slots4home]

i have a very unique problem.
I have a Run for the money vision game and some of the payout are not correct.
I checked and replaced the reels, reel strips, processing board. Double checked to be sure the strips are correct
I did notice that the top Amber light on the board is fast blinking
Any recommendations ?

[cowboygames]

Was that game available in 2 and 3 coin versions where you may have the wrong software?

[slots4home]

It is the correct sb and the max bet is 2 cn
The bonus works when it lands on the symbol
But some of the payouts are not correct.

[cowboygames]

You got me then, the only thing I've seen cause that problem is a 2 coin 3 coin mismatch either in the strips chips or glass. It had been available in progressive or non-progressive there were games that had different payouts depending on which you had but those weren't offered that way and the with no g combinations were the same. Sorry I couldn't be more helpful

[tollguy316]

I have that kit in a 3 coin version.  Are strips 1 and 2 the same ?   And no offense when I state the obviou , but check to make sure the reels are in the notches.....  Bill

[slots4home]

Thanks for trying, I have never run into this problem before.
I may try the mother board next

[slots4home]

Bill,
The sb is 000188
I checked with another person that has that game and it is the same sb chip
The reel strips are in the notches

[slots4home]

Here are the strip numbers
#1 84850500
#2 84850600
#3 84899000

[tollguy316]

The reel strip #'s are correct.  Have you tried testing the reel pays ?   If the reel pays are off by 1 symbol then perhaps the 1st 2 reels are from a slant top ......... Just a thought.

[slots4home]

That should not matter. I thought I might have set it up as a slant but I did set it right as a upright
I will try the reel strip test anyway

[idesign]

It does matter as slant reels have the notch in a different location than an upright reel.

[slots4home]

First I changed the reels anyway
S 2000 reels are the same
You make the change in the program.
Am I missing something?

[idesign]

Yes, slant top and upright reel baskets are different.

[slots4home]

I installed another set of reels with no luck.
Most of the payoffs are correct but some of the big ones are not
When I have done a clear and reprogram it the reels are in the right spot(they are all in line )
1 example is
Reel 1 3 bar
Reel 2 triple diamond symbol
Reel3 3 bar
Payoff 15
Payoff should be 120
I even tried a new processing and motherboard
Thank you all for your time

[slots4home]

I finally got back to this game and corrected the problem.
The reel strips are B,A,C
The game is now correct.

[therockinelvis]

Wow and you replaced the boards.

[slots4home]

I replaced just about everything
I should have checked that