All I have are Clear procedures...>>>
RAM Clear Procedures
1) Put Game flash card in to the compact slot labeled Game
2) Put Set Chip flash card in to the compact slot labeled Base
3) Turn power in unit ON
4) The game will start the Ram Clear procedure that will take up to 5 mins look for single
blinking LED under Secure (S) Switch
5) When the LED under the Secure (S) Switch starts to blink the Ram Clear is finished
6) Turn OFF power
7) Remove the set chip from the Base slot and replace it with the Play flash card

Turn power ON
9) Game will take around 5 mins to boot-up when the game comes up you are to set the
time and date
10) Then save and exit
11) Now the screen will ask you hold the Secure (S) Switch and the Top Left (collect/cash-out) button
at the same time
12) The Secure (S) Switch button can be found in side the logic cage 1st one on the left
as seen in the photo below
13) When you hold both buttons down at the same time the screen will count down 3 secs
14) When you have held the buttons down for 3 secs the gray options will turn white
15) Directions for navigating of the menus will be below the dotted line on the screen
16) Now you can set or change the options on the game
17) When finished setting the options, save and exit
18) The game will come up