Bally 1041 broken Beau / Jones plugs

[Bruce G]

I have a Bally 1041 with one of the interconnects to the mechanism destroyed by misalignment of the pins.  I think I can straighten the bent pins on the male side, but the housing is ruined on the cabinet side.  Anyone have some used / pulls or NOS they are willing to sell? 

Unfortunately, a number of the connectors have been pulled out as well - so I will need to see if the mechanism has the same color codes on the wires as the socket. 

A wiring diagram would be great, if that can be found, or if there is a color chart for the plug wiring. 

Any help is really appreciated

[shortrackskater]

I was going to move this to NLG classifieds for your connector (with a "want to buy" icon WTB) request but leaving it here now for the knowledgable EM people. You may be able to just get the female pins for the beau connector rather than the entire connector. And likely there's a wiring diagram out there as well.

[Bruce G]

Thanks for your quick reply.  I put up a 2nd photo of the damaged / destroyed connector.  It will need replacement, since there are sections missing.  Someone really pounded on this poor thing

[wolftalk]

the 1041-1 paperwork is on https://bingo.cdyn.com/slots/

second pic helps a lot ... I was kinda wondering what the issue was :-)

24 pin plugs are one of the most common sizes, so hopefully someone has some spares to help ya out.  If not, ebay or the parts suppliers should have some.

[Bruce G]

Thank you for the link to the diagram! 

I have found 24 pin Beau / Jones interconnects - but NOT with the two round alignment pins as seen on the originals.  The ones I have found have a single alignment pin. 

If I have to, I'll replace the male and female twin alignment pin connector with a single alignment pin replacement. 

[wolftalk]

https://www.ebay.com/itm/256532991547

looks right ... I'd confirm dimensions.

[Bruce G]

 

I just purchased it