BB2 Conversion to BB3 Trying to play Hot Hot 8 slot

[Maxpay72]

Hello all!  I have a BB2 converted to a BB3 and have the game Hot Hot 8. Just wondering if anyone could direct me on how to set the pins on the Backplane. I have the cabinet set for a blade but the game is telling me it’s not allowed on the blade cabinet.  Thanks

[coolwavepic]

This game requires the touch button deck (buttons on an ipad looking panel) unless someone figured out how to change that.

[Maxpay72]

I have a picture of the game running on a blade standard button deck. Not sure how they were able to pull that off. Anyone know?

[idesign]

Have you tried jumpers to set the machine up as a S32?

[Maxpay72]

Not sure on the jumper settings in order for it to be identified as a S32.

[idesign]

I think it's pins 5, 6 and 10 to ground

[Maxpay72]

Ok.. I will give it a shot. Thanks!

[Maxpay72]

This game must not work with a BB2 to a BB3 conversion. The S32 cabinet pin set up works to identify the cabinet as a S32. But when It loads the game up all the way to configuration then errors with (No clients found for gfx connection.

[Maxpay72]

Anyone have any insight on why Hot Hot 8 is erroring with (No clients found for gfx connection) I'm assuming it's the graphics having problems with the screen size.  Thanks

[rickhunter]

It is looking for the tablet, that's why there's no "client" as it doesn't have a display attached.

[Maxpay72]

Thanks for the response! Is it possible to add the touch screen LCD to a BB2 converted to a BB3?

[rickhunter]

I think some of the users here have done that, it should work if you can source the touchpad.

[Maxpay72]

Thanks Rickhunter! 

[idesign]

Here is a touch pad on ebay.  Not mine and have no relationship with the seller


https://www.ebay.com/itm/196365820819