WTB Ceronix XX93 Neck Board/Chassis

[Justin]

Good Evening all, I am in need of either a neck card or full chassis for my Ceronix 1793 monitor out of an I-Game/Game King. I believe it to be VGA. Please let me know what you have.

Thank you!

[hotlsot]

I may have a working neck board. There were 2 types. the plug configuration is different where it plugs into the tube. Which one do you need?

[Justin]

It appears to be a 10 pin socket with 2 focus wires it's a Chungwa tube.

Full discloser, I am also in correspondence with Alan @ K-Lar to see if he has them as well. I would like to hear from both of you though if you are willing.

[Chris-socal]

Justin
I have a complete xx93 chassis with neck board but it’s a different neck board.

This one is from a 2093 monitor. I think the chassis is the same and the tubes vary depending on resolution.

Chris

[Justin]

Unfortunately I don't think that will work on my tube. 

[Chris-socal]

Agreed. See what Alan has to say. Someone somewhere is bound to have one.