Wms bb1 Zeus II won’t clear/load bash-2.05b#

[Thedeer]

Can’t clear my bb1. I put the clear chip in it loads and gives code: bash-2.05b# then the screen goes black same thing when I try to just put the game os in. I just got a new board for this so I’m not sure what the issue is. Please help check out the photos below

[Stayouttadabunker]

Can you post a clear photo of the MPU/brainbox circuit board?
I think you're missing the SJUR chip or it's corrupted?

[Thedeer]

I just bought a new mpu/cpu from slots unlimited. So I don’t really see that being my issue what else could I be missing?

[erbs]

As Stayouttadabunker mentioned your missing the SJUR chip. Its an 8 leg chip that goes in SPI U2 socket.

[Thedeer]

I’ll try that and get back to you y’all hopefully that is the fix! I’m pretty sure I had one on my other board

[erbs]

Make sure you put the chip in correct. Chip has a notch on one side. Outline of notch on the board.

[Thedeer]

It worked out not just to find a new ticket printer and it’ll be perfect.Sorrybut had another random question if anyone knew how to take off the top glass. Thank you everyone

[rickhunter]

open main door.  The glass should have a metal bracket on the bottom with a "lip".  Pull up on the lip and then pivot the glass forward from the bottom, then after it clears the cabinet, it should just slide down and clear the top edge of the topbox.