Lucky 8 Question?

[jkrez]

Hi guys, New here. Tried search with no luck. I have had a Lucky 8 (Cherry Master) for years. My dad used to play it so much monitor went out. After many years I finally found someone to repair it. The picture is a little goofy until it heats up. I also noticed if I put a shim under connector plug it fixes the picture for the better. My main question is... How do you clear the credits without having to play it to zero credits? The red button on left front of unit scrolls payout screens. The right button seems to show dip switch position. The right button can only be exited by turning off and back on.


Thanks in advance


Joe

[CVslots]

Hi Joe,


Not a whole lot of Cherry Master guys on here, but hopefully one can give you some insight. Meanwhile, welcome to NewLifeGames.com! We're glad to have you! 

[jkrez]

Thanks for the welcome

[Highster]

Does this have the standard 72/10 pin two connector setup?

[asgard]

Hi guys, New here. Tried search with no luck. I have had a Lucky 8 (Cherry Master) for years. My dad used to play it so much monitor went out. After many years I finally found someone to repair it. The picture is a little goofy until it heats up. I also noticed if I put a shim under connector plug it fixes the picture for the better. My main question is... How do you clear the credits without having to play it to zero credits? The red button on left front of unit scrolls payout screens. The right button seems to show dip switch position. The right button can only be exited by turning off and back on.


Thanks in advance


Joe

Pin 28 on the parts side of the long edge connector is to clear credits. You will also need a ground from pin 36.