PE+ "4th Of July" Changed Motherboard and now it changed to $1 instead of $0.05?

[nathancarlson.ws]

I recently installed another motherboard in my PE+ "4th Of July" Machine. When I had the old board in it was setup for nickles. But with this new board it says $1 on the screen and I cannot change it as it also says bill acceptor enabled? But I do not have a bill acceptor? I cannot change the denomination because it says bill acceptor enabled but I also cannot disable it in the test menu. When I go to the denomination screen it says I need a set chip to change selection. Ive read about using a set chip to enable a bill validator and change denomination I guess I would need it to disable it? Seems wierd just changing the motherboard would change the settings as there are no chips on the mother board just connections? What do you guys think? I want it to says 5 cents again haha. Also the bottom candle light stays on even after playing a few times? Would that be related to something?

[Next_Gaming]

Hello.

The motherboard have installed a 24c04 Eeprom could be a reason for the denominación change, to restore settings do You need perform a full clear wiht the clear chip this clear the ram and Eeprom and leave You to adjust you're  desired settings in case that you don't need a bill  acceptor. for Bill options You need setchip 004. Hope this helps.


Best Regards

Next

[nathancarlson.ws]

OK thanks I just ordered a chip set. I will update if it worked when I get it in a few days. Thanks!

[nathancarlson.ws]

I bought a clear chip an set chip. Used the set chip and was able to change the denomination back to 5 cents and disable the bill validator that it doesnt have. Thanks for the help!

[Next_Gaming]

Hello

Great, glad to hear, now enjoy..

Regards.