Installing a MARS MEI into a Blade Cabinet

[Ash100]

I recently picked up a WMS BB3 Blade Cabinet without the BV or Printer and am looking for some advice on how to install a MARS MEI Cashflow Bill Validator into it.

The pictures show the compartment in which the Frame would mount, but there's no holes for screws, pegs or anything else that would determine where the frame would sit inside of it.

Also posted is a picture of the MEI Frame Assembly, which I'm assuming is the correct one for this cabinet. But I could be completely wrong. I've installed plenty of them in IGT games, and even Bluebird 1 and 2 Machines, but this one has me stumped.

Any information or photos will be appreciated.

Thanks, Curtis ash100

[Melissarmdlm]

There's a missing metal plate that goes behind the stacker frame. You can see it's position by the slits in the top edges of the machine housing.
with the correct plat it's slots right in and the stacker frame attaches with four screws to it.
I own a blade if you want a picture.

[Ash100]

Thank you for the reply.

I figured something was missing, because nothing about what I had to work with made any sense.

If you feel like posting a photo, that would be great.

I'm sure I can find what I need with a couple of phone calls.

Curtis ash100