display controller board (VFD)

[marko]

Hi, I have a 192x16 VFD I'm using for my homebrew S2000. I don't have the display controller board (board between the display and netplex). I'm going to duplicate its functionality (except instead of netplex it will use the bus my system is using, CAN). Anyway, a schematic of the stock display controller board would make this go smoother. Or a pinout of the VFD board, anyway. (the 26 pin connector).


I also have the 9 line credits-wagered-per-line LED display (the one that goes left of the reels on 9 line games). A schematic of it would be helpful too.

I used to be able to see the downloads on the old site but can't seem to on the new one...?

thanks for any help guys

[Tilt]

Good luck with your project.  Here's schematics of the controller and display board:

[marko]

Great, this should help. thanks