WMS blade TITO help

[Ridesleds23]

Alright so i bought 2 games from SMU the other day, one a blade, the other a g23 and wanted to turn off the hit service button twice to add $100.  Was messing around in the settings and read somewhere it was in comm settings.  was in wager account transfer options.  everything was disabled except the last thing which says GM cash in control so i disabled it and saved.  Now tito doesnt work so i shut off the machine and turned it back on and still nothing.  Also of course tried to set this option back thinking it would fix it obviously but it wont let me enable it and now 2 other options are enabled.  What do i do to enable the lower one and turn the other 2 back to disabled?  Also i found where the legacy bonus was after i made this mistake and it wont let me change that either....

[RivieraDanny]

Having some tito trouble myself but this one could be addressed by whoever made the tito maybe??  Titoathome??

[Ridesleds23]

It worked completely fine before I messed with that option.  I was just trying to figure out how the heck to enable or disable the options.  Idk why it let me disable but now won’t let me change anything…

[sccarlso]

The settings for a Tito card on a BB1/BB2/Blade isn't setup in that menu.  The "Wager Account Transfer" stuff is for ETF transfers and such, which is different than the SAS functions that a Tito card uses.  You shouldn't alter anything in that section.

Also, there are some settings throughout the system that once you set them, you can't change them unless you clear the machine with your clear card and reload the machine.

For Tito@home (should be the same for other Tito cards as well), settings for the Tito card are pretty easy. 


Settings that are needed follow:
You will have to do a clear on the machine and set everything up on the machine again.
These are just the settings needed for TITO to function with your machine.

Under setup go to:

Machine set up -> machine setup info -> Set serial number to 1 and asset number to 1

Device setup -> set voucher printer to Seiko Netplex no matter what printer you have
(some of the different software have to be set to the correct printer so I try first with the
correct printer and if it doesn’t work choose Seiko Netplex.)

Comm setup -> serial ports -> set host 1 to SAS primary. Then under dual host setup
set everything to SAS primary.

Click Config next to host comm. 1. Set address to 1, validation to system, then set
everything else except resend hand pay pending to enabled.

Under voucher data setup is where you will set up what it prints on the tickets when it
prints.

Setup Video link is below (for a BB2 starting from after you clear and load the OS/Game and reach the Call Attendant menu), including setting up/enabling the game, including Tito settings, but the menus are pretty much the same for a BB3/Blade.

https://youtu.be/cKdr5-PTuw0

[Ridesleds23]

This is very helpful thaank you!  So mad at myself for touching that setting, i found you set dip switches on TITO@HOME now i have to get a clear card and try to setup from the beginning the way it looks as i cant change the one setting i changed and it caused TITO to not accept anything only pay out.  I really appreciate the help!

[sccarlso]

A clear card is a must have for any WMS machine.   So you want to have one anyway.

The same clear card works for both BB1/BB2 machines, but BB3/Blade machines use a different clear card that's specific to them.

So be sure you get a BB3/Blade clear card.

[Ridesleds23]

Ok good thing you said something, the ones i seen on ebay said bb1/2/3 so i will keep an eye on the correct one!  Thanks Again!