aristocrat mav500/mk5-6 button wiring

[jeepin2day]

wondering if someone could send me some pictures of the P11 connector on the backplane board, so i can see what color wire goes to what pin or spot on the connector.
someone cut the plug off the end of the button wiring harness. I have a new connector, just need to know where to put the wires.
Thank you, Mike

[LuckyDog]

Here's the pics from a MAV500.
What's the connector part #?  Hopefully will never need one, but who knows.

[jeepin2day]

Honestly, i cut the plug off an old atx power supply. just going to splice on to the wires.

[LuckyDog]

Great idea!

[jeepin2day]

the pictures helped a lot, but there is 2 i can't see good enough to tell what they are. it's on the non clip side, 2nd from the right and 7th from the right. they are both red, but can't tell what color strip they have.
could you see and let me know.
thank you so much.

[LuckyDog]

Here's a close-up of pins 1 and 2 with stripes.

Pin 7 wire was in there tight; but didn't see any stripe. (I'm also a touch color blind !! )

[jeepin2day]

 :thank_you:Hey, Just wanted to thank you again for the pictures. I got the machine working now.

[jeepin2day]

Yeah, I just made a wild guess on the last 2 wires, It was a 50/50 shot. but it all worked out. all the buttons are working.
Thanks, Mike

[LuckyDog]

Glad you got it up & running !

[lvdesertrat]

I'm actually in search of a mav500 slant top 13 button wiring harness. I can find the upright ones, but nobody seems to have the slants.
I've tried all the usual vendors, but no luck. Any idea where else to look or anything.
Thanks for the help.