Universal Co LTD Slot Machine, (Currently Broken)

[Doc4tmb]

Due to conditions beyond my control, I no longer have the time, or ability to work on repairing this machine.

I know all the Fuses are working. The battery has been replaced, and I have replaced R22 and R23, although one of the 2 may be wrong value.

I am located in Oxnard California 93035

I am unable to pack it for shipping, Due to the weightSo it would have to be a pickup.  If No one is able to pick it up, I will most likely have to ewaste it, or try to sell it on craigs list.

This would make a great parts Machine, or If you have the ability to troubleshoot it.

I'm looking for $100 what I paid for it, I've already bought a new battery and resistors which I had a local friend who can solder them in.

I also have the other part of the CPU Cage


I do have the coin drop, and both top  and bottom Glass, and the Hopper

Anything Circled in Green is still available. The complete wireing harness fits in a Medium flat rate USPS box, all the other parts I am able to fit into a Large flat rate USPS.

If you want the Top glass or the middle class or the botton lass that will have to be a custom side UPS box and price will vary

[Rob in AK]

do you have the other glass as well?

[Doc4tmb]

do you have the other glass as well?

Yes see  below

I do have the coin drop, and both top  and bottom Glass, and the Hopper

[Pitts256]

Are you selling the CPU with the cover?

[Doc4tmb]

Are you selling the CPU with the cover?

 Im looking to sell the whole machine for $100.

It would make a good spare parts supply

Im not sure its cost effective to ship the machine,  but parts should not be to bad. Depending on the part. Same $100 + shipping costs.
 
Would the cpu be the only part you are interested in? With or without the steel cover?

[Pitts256]

Just the CPU with the cover.

[Doc4tmb]

Just the CPU with the cover.

I think its to big for a usps flat rate box.  So I'd have to do ups, $100 plus shipping , dm me your address it may take me a few days to get it packed and sent out.
PayPal?

I've got a couple big work projects

[Pitts256]

It fits in a USPS flat rate box with plenty of room for packing material. You still need $100?

[Doc4tmb]

It fits in a USPS flat rate box with plenty of room for packing material. You still need $100?

Yes, its what the whole machine cost me, the board has a new battery and 2 new resistors. 
I was wrong it looks to fit in a medium, I'll do my best at wrapping it and
 See how much bubble wrap i can find.

100 plus 17.10 for mainboard with steel cage.

Dm me your info and it's 4 20 am California time I'll respond tomorrow

Thanks

[Doc4tmb]

It fits in a USPS flat rate box with plenty of room for packing material. You still need $100?

Are you still interested in the mainboard and cage? 

Im only asking the 100 as the rest of it has little value without the mainboard.

I've attempted to locate a replacement but they are very scarce.

 Thanks


.

[Pitts256]

Your right, the machine's just a cabinet full of spare parts without the main board, many of value though. After reading your previous post the main board has issues from battery acid damage. It could end up being an unrepairable board with some salvageable IC chips, for which the majority of those chips are commonly found new at Mouser. Keeping that in mind if the board didn't show signs of acid damage I'd be willing to purchase to repair but in the current condition it's just a "core" with a core value. If you can sell it as a complete machine, do so to increase the value to the buyer, if you have to part it out then I'd be interested in the CPU at "core" value.

[Doc4tmb]

Your right, the machine's just a cabinet full of spare parts without the main board, many of value though. After reading your previous post the main board has issues from battery acid damage. It could end up being an unrepairable board with some salvageable IC chips, for which the majority of those chips are commonly found new at Mouser. Keeping that in mind if the board didn't show signs of acid damage I'd be willing to purchase to repair but in the current condition it's just a "core" with a core value. If you can sell it as a complete machine, do so to increase the value to the buyer, if you have to part it out then I'd be interested in the CPU at "core" value.

What is considered core value?

Make me an offer?

[Pitts256]

PM Sent.