I have a IGT-M machine that I just purchased. It's in amazing shape but it has a issue. When I put a fuse in it it pops and of course the led display won't work either. I went through the wiring made sure everything is plugged in, made sure there was no ground issues. So when I slide out the boards, and slide in to plug in one at a time the fuse pops when I slide in the pcb board. I replaced the battery in it of course it did not work, so I'm assuming there is either a short on the actual board itself ot on the main back board where it plugs in at. For the life of me I can't find a replacement pcb board or someone to repair it. I already ordered a main back board that it plugs into. Does ANYONE know somewhere i can send my pcb board to to have it gone over repaired and tested? Or someone that has had the same issue that can give me repair recommendations that i can do myself? It has to be a simple fix but inwant to make sure I'm not swapping parts that I don't need.
Machine : IGT-M
Machine serial number : 303086
Machine model number : 1634B
Pcb board number : 7550510
Board serial number : 4273
Manufacturer date : 11/1986
Machine type : 3 reel 25cent fruit slant top