BB2 Stacker switch jump question

[Phan000]

I need to jump the cherry switch on this bb2 bill stacker.

Someone has removed, used duct tape, but it inevitably loosens.

Anyone remember the wires that need to be jumped?

Thanks

[Stayouttadabunker]

Throw the cashflow bill box into a dishwasher.
There's a dirty prism located inside on the stacker bill pusher plastics.

If you STILL want to jump the wires on the cherry switch, take note of the two female nylon quick-disconnect terminal wires that are separated apart on three male switch tabs.
They are set on the NO (Normally Open) tabs.
Move one of the female terminals to the middle NC (Normally Closed) male tab.
You can see how a cherry switch is configured by looking at the diagram molded to the body of the switch.