Conversion from A2 V22/V22 Curve to V22/V32

[marcbollinger]

Sorry, searched for this first but couldn't really find anything.

I don't necessarily need the detail instructions at this point, just wondering what would be required to do this conversion. First up, I assume just replacing the curve monitor with a standard 22 - are there any special harnesses that I would need to acquire that are different from the curve monitor?

As for the top monitor, will just use the vertical tv - I assume nothing special here except closing the switches in the top.

Is it that easy or am I barking up a tree

Marc

[coolwavepic]

For going to a flat monitor is REALLY easy. You're actually removing 2 harnesses by going to a flat 22 monitor. You will no longer need the USB cable or the 7seg harness. You can just leave those int he cabinet if you bounce back and fourth between the setups.

I also did a "hack" for the V22/32 setup here: /nlg/index.php?topic=45670.0

This is great if this is your machine and want options.

When removing the curve monitor BE CAREFULL. Its heavier than a monitor and you dont want it slipping out. Just take your time.

[marcbollinger]

For going to a flat monitor is REALLY easy. You're actually removing 2 harnesses by going to a flat 22 monitor. You will no longer need the USB cable or the 7seg harness. You can just leave those int he cabinet if you bounce back and fourth between the setups.

I also did a "hack" for the V22/32 setup here: /nlg/index.php?topic=45670.0

This is great if this is your machine and want options.

When removing the curve monitor BE CAREFULL. Its heavier than a monitor and you dont want it slipping out. Just take your time.

Thanks Charles - Oh yeah, believe me, already had to replace it once.. and the door doesn't stay open anymore on its own either LOL. That was a pain in the ass.

I appreciate it - yeah, I saw your hack. Sadly, don't have the topper for this, just the middle/top screen and ideck.

Marc