sigma sg32 1988 ish

[Revitout]

Hi , i am have a working sigma SG32 winners choice wild bar 3 reel machine.
Can someone tell me what the 10 dip switches do on the board and if you can change the % payout on these models.
Thanks Matt.

[Chris-socal]

Hello, welcome to NLG.
I would need to see which dips you are talking about. Please attach a picture of the entire board and one of the switches.
Many times the wire jumpers have been replaced with dip switches.
There is a manual for SG series in the file system but you need to be a contributing member, even if you only contribute once you will get access for 30 days.
The dip switches and jumpers are covered in the manual. So its worth paying the membership just to get the manual.
What are you trying to address? Most of the time the dips are set for the most common use. Are you having problems with the machine?

Chris

[Revitout]

Thanks for the reply...yes I will get the manual...sg32/50? I think it around 1988 yr.
The game runs fine...sometimes a coin will make it to the hopper but it doesn't register as a credit. Maybe the optics need a clean. I have changed from old 20 cent coins to current 50 cent coins so maybe it's that.
I really was just looking to change the payout percentage or even see what it's set at. Cheers Matt.

[Revitout]

More pics

[Chris-socal]

Yes, those are jumpers that impact payout odds and max hopper payout I believe. However, the game % is set by the game proms and the jumpers need to match the game, otherwise the game will error on boot.
At least that was my experience. I bought a game that threw an error and wouldn’t play. I noticed someone cut all the wire jumpers so I re-connected them and the game started right up. I looked at the manual and the jumpers were the odds.

The game proms originally came with a data sheet so you could set the game up correctly for the proms that are in it.

Chris

[Revitout]

Ok thanks Chris...best i leave it be !