wsm bb3 blade aftershock wont boot up SOLVED

[mr.jeepster]

 :applause:I been messing with this problem for about a month.  I keep all my machines off for days at a time sometimes . when turimg the aftershock on, both upper and lower screens are black but front button panel are on and topper is on, open the door all fans are on and cpu lights on left are on. I tryed 3 differnet cpu nothing, power supplys ,video cards, check wiring,connectors etc and 1 took a 3.5 from willy and cleared and it came back alive and booted up. so I put back the stock one and it work all day. turn everything off a couple days later - same thing ..  Im confused . it dont make any sence why this is happening.../?

[mr.jeepster]

picture of it

[mr.jeepster]

I pulled willy wonka cpu out and put the aftershock cpu in and there is a problem with the cpu .. I again put willy wonka cpu in and did a clear card it and set it up for aftershock and its been running for 2 days no problem.  so ordered another cpu ..

[mr.jeepster]

:applause:I been messing with this problem for about a month.  I keep all my machines off for days at a time sometimes . when turimg the aftershock on, both upper and lower screens are black but front button panel are on and topper is on, open the door all fans are on and cpu lights on left are on. I tryed 3 differnet cpu nothing, power supplys ,video cards, check wiring,connectors etc and 1 took a 3.5 from willy and cleared and it came back alive and booted up. so I put back the stock one and it work all day. turn everything off a couple days later - same thing ..  Im confused . it dont make any sence why this is happening.../?