How to calibrate the reels on BB2 Transmissive reels slot?

[rankbronc]

Hello
I have a WMS Goldfish 2 slot with the transmissive reels. The existing reels strips were faded, and I acquired a new set of reels. After swapping out the reel strips and replacing everything, the reels are out of sync as far as paylines go. Is there a way of re-calibration the reels. The strips were installed correctly with the strips aligned with the notches.

Thanks for any advice in advance!

[Stayouttadabunker]

I do believe that you need to change the reel encoders?
Look inside the reels...what color are yours?

Click on photo below to enlarge if needed...>>>

[rankbronc]

They are green

[Stayouttadabunker]

I think you need the orange ones.
Post the numbers from the labels of your CF cards.
Maybe someone with a list, with compare it, and thne advise you what to do.

[bigj]

Mermaids and Armada are green optic bands. Check your notches. I bought brand new strips and they were notched wrong and I had to re notch them. You can see in the photo I now have two notches. The correct notch on both games is between the two symbols and not between the symbol and the clear area. Also original Armada strips with the correct notches.

[Stayouttadabunker]

Thanks for verifying the reel color bands bigj....I was not sure which color they should have been.