Help with Roy Clark the entertainer pinball

[kooties8]

I recently bought the Roy Clark cocktail pinball machine with some issues. I have repaired most of the problems to the point where I can play the machine. Now I would like to fix the minor issues but I cant find to much information about these Allied Leisure pinball repairs. If you see the photos, the players 1 and 2 LEDS are always lit as well as all 5 ball LEDs, so I cant tell what ball I'm on. The other minor issue is the ghosting of the lights on the playfield.  Any help would be appreciated, I can live with the issues but would like to learn and repair them. Thanks in advance.

[Chris-socal]

Most likely you need anti-ghosting LEDs. You can also try adding one incandescent bulb to each circuit and it might absorb the residual low voltage floating on the line, the trick is you need to identify each individual line and terminate it with a regular bulb. As an experiment find a line that has more than one bulb and change the last one in the line to an incandescent bulb, see if the remaining LEDs go dark.
Older games do not do well with LEDs.

Chris

[kooties8]

Thank you. I will try that method.