JCM iVizion Cashbox Handle Repair Kit

[stlscott]

Do you have a JCM iVizion Cashbox Handle where it just pulls out?  This is a known problem with the original design.  The Pin in the end snaps off from pulling the handle in and out.  We designed a SUPERIOR end to the handle.  Our design is improved over the original and provides an almost "METAL" like strength with a reinforced in-house design.

This Kit includes 2 end pieces.  This kit does NOT include the green rubber part, this is for the ENDS that go over the rubber part.  You must also have the original screws (we do not include screws or the rubber handle part).  Cashbox is also NOT included

Cost for 1 pair is $10, volume discounts available.

TO install:
1.) Remove the two screws holding the handle in place, on each end
2.) Replace each end with our handle housing upgrade
3.) Move the rubber handle in and out to make sure you have a good fit
4.) Enjoy a working cashbox handle once again!

Picture of the cashbox shows the repair kit (ends) on the cashbox. 

We offer the handle repair kit in GREEN as well as black, just send a message of the color you prefer.

We also offer iVizion cashbox Latches as well as MEI Handle repair kits and latches as well.