WMS Blade Cabinet won't show Game in Configuration Menu

[Ash100]

I'm trying to set up a BB3 Spy Vs. Spy in a Reels Blade.

When I get to the Credit Page and select .01 for Base Denom and hit Save, I go to the next box for  Denom Configuration and theres no game shown to enable. It just says Empty, see photo.

At the bottom it reads Game Does Not Support Mult Denomination/Tokenization and Player Denom Shall Be in Multiples of Accounting Denom.

Ive tried. 01 and 1.00, and turned off Multi Denom.

Any Ideas what to try next?

The SJUR is 600068-112 if that makes a difference. It could be the hang up, but i don't have a different Chip to try.

Thanks,

Curtis ash100

[RB]

Did you try selecting and confirming the meter denoms pictured? both are red, not green.

[Ash100]

Yes, they're locked out and not selectable.

Not sure where to go from there.

It shouldn't be any different than setting up the CPU-NXT2, but I've never run into this situation before.

Thanks,

Curtis ash100

[Stayouttadabunker]

Yes, they're locked out and not selectable...

I'm not sure if the red ones can be changed or not.
Are you touching the green buttons?...not the red ones.
Because it looks like the green ones are "raised" and ready to to be pushed down - to enable the the penny & dollar in the red dialog boxes.

[Ash100]

The Green ones do nothing. So, they're not selectable.

I'll try with a different SJUR this afternoon and see what happens.

I'll post my findings.

Thanks, Curtis Ash100

[Ash100]

It was the SJUR Chip. It was for a Greede VLT, so not what I was looking for.

Put in a Mississippi State Jurisdiction and was able to program it.

But, now I'm stuck with the Screens reversed. I had to put the Menu on the Top LCD to program it (Transmissive Reels) using the bottom Touchscreen like a Mouse. I don't know how I got it to go up there, and I can't figure out how to make them swap back.

These things are aggravating.

Curtis ash100

[hsjerry]

Perhaps you just mixed up the ports by mistake since you did swap the jurisdiction?