Help needed to remove top monitor from Multimedia WBV-01 slot machine.

[jstuelke]

I am refurbishing a Multimedia/Everi WBV-01 slot machine and I need access to the top monitor to replace a video cable. In most cabinets there is a latch or cable you pull, but on this cabinet I can’t find anything to release the housing. Any help would be appreciated.

[shortrackskater]

Moved to Other Video Games from "Reel Games" 

Also... I just noticed this ... member ayrton2727 ironically has posted the same question on August 1st! So check his thread time to time. (I'll put the same message there!)

[shortrackskater]

 

[Stayouttadabunker]

There's an upper door release.
You need to raise the monitor to get at the nuts under the top of the cabinet.
I'm NOT sure if you have to remove the monitor itself, but you'll see, if you have enough room to get in there or not.

Click on photo below t enlarge if needed...>>>

[jstuelke]

I was able to get it figured out through a member on a Facebook page, but I thought I’d add a couple of more pictures. If you lift the middle door, there’s a handle you pull forward that releases the upper monitor frame. I looked for a long time on how to do this and I even reached out to Everi customer service. One of their techs actually called me back, but they have no information on these cabinets after they bought Multimedia (I was shocked they even responded).