WTB WMS 40X $1.00 HOPPER OR CONVERSION PARTS

[dale]

Looking to buy a WMS 40X $1.00 Hopper or the conversion parts. Shipping to Utah 84765. Email dalebeckster@hotmail.com

Thanks, Dale

[Jim]

tell me what brand hopper you have,  most Bally parts will work in the hoppers that were made for Williams games,  you would need the pin wheel, the shelf wheel,   the knife in those hoppers were metal, and they should be good for most coins.  I probably have the parts you need.

Jim

[dale]

Thanks Jim for the quick reply. Looks like Seiko. I would need enough foe two hoppers.

Dale

[CVslots]

I have 2 WMS hoppers...may be what you're looking for. I don't know anything about them really, just was told they were working pulls. have the coin heads and comparitor sir you can use anything.

http://www.centralvalleyslots.com/wms-upright-hopper--5cen5.html

[Jim]

Dale,   does your hopper have rollers that the pinwheel rotates on?   is the shelf wheel  flat or does it have a rolled edge in the middle .


I have one set for sure,


Jim

[dale]

Yes the Hoppers have rollers and the wheels have the rolled steel nibs.

Dale