trying to change multi nomination setting

[ALIDMAN]

Hi everyone , need little help here please , my machine is set for $5/$10/$50/$100 ( not touch pat , I have button to switch between the nominations), I am trying to change it to smaller nominations ,I have key chip 45 the machine and then I went to 7.1.1.1 and tried to change the nomination from $5 to .001, but it wont let me change it  , I did go to 7.1.1.3 and tried to change that also , but machine wont let me change it , there is  :duh:no credit on the machine and I know the key 45 is working because I got the printer to work, any ideas ? tnx

[qbert]

Check to see what the accounting denomination is.7.1.1.1 You can not set any value below the accounting denomination. The only way to change your accounting denomination is with your clear chip but that will require you to have to set all of the settings in the machine and I don't recommend it unless you are really comfortable with machine adjustments.
There are directions on this site to walk you through the clear procedure for s2000.

Rich

[ALIDMAN]

thank you for reply , the machine is set at $5 and up and I have to keep putting $100 in there , I don't want to be high roller in my own house lol.
if that's the only way to change it then I have to try clear chip the machine , have not done that but I guess its time to start, thank you again

[qbert]

OK I'm attaching a few links to help you. Do not set up tito unless you have that hardware.
http://newlifegames.com/nlg/index.php?action=dlattach;topic=2115.0;attach=4471
 
http://newlifegames.com/nlg/index.php?topic=320.msg912#msg912
 
These two links should help you and remember if you get stuck there is nothing that we can't help you with.
Just ask and good luck.
 
Note :Once you clear it and set the accounting denom to .01 and the coin denomination to whatever your hopper is set up for if you have one, most anything else can be fixed with a key chip.
 
 
Rich

[ALIDMAN]

Thank you , I got it fixed , had to study through some of other QA and had to put pieces together from each QA and WALLA , it works now , I had to clear chip it 7 times but I got it to work, the hard part was game play setting and I could not figure out how to set game 1 for .25 and game 2 50 and on , I still don't know how I did it but It worked ,that part is very confusing if any one has  configuration on that please let me know , thank you guys again