Igt reel glass and light

[markb7605]

Im looking for black full size reel glass for an s+  and the light panel inside the glass thank you

[Jim]

I'm pretty sure I have those available, will check when I get home.


Jim

[slots4home]

I believe that is a S not Splus
If Jim does not have it, I believe I do.

[mvco]

Looks to me to be an early S-Plus made between 1989 and 1993.  They used that reel glass, and mounted the board on the left side of the cabinet in those pre bill acceptor days. 

[Jim]

yes they were used for the S model and the S+ model. the big difference was the lamp bar, the lamps were held in place by a force fit  and the bulbs were #47 .  put off alot of heat and the plastic became brittle  and the lamps wouldn't stay in place.


I only have a new purple and two red white and blue reel glass in that style,  have about 4 brand new black reel glass for the later style machines.  also I have the older style lamp bar, not the one pictured. I also have hundreds of the  white/red   decal  on the right side of the glass.




Jim

[markb7605]

ok thank you jim ill see what slots4home has

[Jim]

Mark,     you can upgrade to a newer reel glass and  light panel.   you have the connector for the three lamps, coin in, coin accepted and denom.  the other connector should have enough length to get back to the newer style glass.  the newer reel glass has the winner paid and credits display along the bottom of the reel glass, the denom is in the center, the coin accept and insert coin are on the right.  so I have both those parts ,new glass ,still wrapped in the soft white protection foam, and the newer style light bar.

let me know


Jim