New Life Games LLC
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length

News:

Welcome to the NewLifeGames.com message forum! 

 


NLG Site Navigation Menu


Archives of old posts can be found at...... Newlifegames.net/nlg/
« previous next »
Pages: [1]   Go Down

Author Topic: Bally S6000 23 error HELP!!!!  (Read 4215 times)

0 Members and 1 Guest are viewing this topic.

Offline Nawton

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 35
  • Reputation Power: 2
  • Nawton New User has no influence.
  • Gender: Male
  • NLG
Bally S6000 23 error HELP!!!!
« on: September 23, 2018, 07:59:05 am »
Okay, I have a bally S6000 that has the 23 error showing up. I have the leave in clear chips. I have replaced the optics and coin comparitor and these were both working about a week ago without issues. I am also having issues with the bill validator as well. I have also replaced the main-board also. Here is where the problem started. My bill validator was not cycling but the lights were on so I ordered a refurbished one from World wide gaming. I shut the machine down and replaced the complete validator and did a clear. I flipped the DS1 8 to on and proceeded with the clear. I let the machine go through what it had to shut the machine off and turned the DS8 into the off position closed the door, it cycled the reels and then went straight to the 23 error. Now I have tried all steps to get rid of this error. Opening and closing the door. Making sure the optics were cleaned. Making sure the harness was connected. Tried the reset button and nothing. Still shows the 23 error. I also replaced the harness between the back plain board and the validator. This was just supposed to be just a validator change but now has ended up a nightmare. Anyone have any ideas on what is going on or what I might have done wrong?? Help!!!!!!
Logged

Offline pbwizard25

  • Contributing NLG Member
  • NLG Member 251 to 500 Posts
  • *
  • Posts: 410
  • Reputation Power: 31
  • pbwizard25 Is working their way up.pbwizard25 Is working their way up.pbwizard25 Is working their way up.
  • Gender: Male
  • NLG
Re: Bally S6000 23 error HELP!!!!
« Reply #1 on: September 23, 2018, 08:09:00 am »
Check ds2 #8 it should be on. Try without the new bill accepter and narrow it down. Scott
Logged

Offline Nawton

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 35
  • Reputation Power: 2
  • Nawton New User has no influence.
  • Gender: Male
  • NLG
Re: Bally S6000 23 error HELP!!!!
« Reply #2 on: September 23, 2018, 08:19:58 am »
Made sure DS2 8 was in the on position and it is. Took out the bill accepter and still the same thing. Even tried a clear again and still the same thing.
Logged

Offline Sunrise Side

  • Sr NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 3226
  • Reputation Power: 212
  • Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!
  • Gender: Male
Re: Bally S6000 23 error HELP!!!!
« Reply #3 on: September 23, 2018, 06:27:51 pm »
If you changed the MPU, be sure the DIP  switch setting is set properly for the type of bill validator you have. WBA or Mars.  If you have to change the setting  you will have to do another clear after the changes are made.
Logged

Offline Nawton

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 35
  • Reputation Power: 2
  • Nawton New User has no influence.
  • Gender: Male
  • NLG
Re: Bally S6000 23 error HELP!!!!
« Reply #4 on: September 24, 2018, 03:08:34 am »
Quote from: Sunrise Side on September 23, 2018, 06:27:51 pm
If you changed the MPU, be sure the DIP  switch setting is set properly for the type of bill validator you have. WBA or Mars.  If you have to change the setting  you will have to do another clear after the changes are made.
I understand that and the switches are correct. The problem that I have to fix first is the 23 error. I will get to the validator after I get the machine back up to at least take coins. Oh and BTW the switch on the front of the MPU is in the on position.
Logged

Offline Sunrise Side

  • Sr NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 3226
  • Reputation Power: 212
  • Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!
  • Gender: Male
Re: Bally S6000 23 error HELP!!!!
« Reply #5 on: September 24, 2018, 07:19:35 am »
Logged

Offline Nawton

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 35
  • Reputation Power: 2
  • Nawton New User has no influence.
  • Gender: Male
  • NLG
Re: Bally S6000 23 error HELP!!!!
« Reply #6 on: September 24, 2018, 11:04:21 am »
Quote from: Sunrise Side on September 24, 2018, 07:19:35 am
Read through this. http://newlifegames.com/nlg/index.php?topic=4346.0     And this.  http://newlifegames.com/nlg/index.php?topic=208.0
Read all of post of those posts and tried all of their steps. Nothing worked. I checked and double checked everything and still the same. 23 error.
Logged

Offline pbwizard25

  • Contributing NLG Member
  • NLG Member 251 to 500 Posts
  • *
  • Posts: 410
  • Reputation Power: 31
  • pbwizard25 Is working their way up.pbwizard25 Is working their way up.pbwizard25 Is working their way up.
  • Gender: Male
  • NLG
Re: Bally S6000 23 error HELP!!!!
« Reply #7 on: September 24, 2018, 02:27:22 pm »
Did you check the pins on the back of board where it plugs into backplane ? Make sure one is not bent
Logged

Offline Nawton

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 35
  • Reputation Power: 2
  • Nawton New User has no influence.
  • Gender: Male
  • NLG
Re: Bally S6000 23 error HELP!!!!
« Reply #8 on: September 24, 2018, 05:27:16 pm »
Quote from: pbwizard25 on September 24, 2018, 02:27:22 pm
Did you check the pins on the back of board where it plugs into backplane ? Make sure one is not bent
Yes. Checked all pins and connectors. Everything looks good. Hell this has been a pain in the butt.
Logged

Offline Badbaud

  • Topic Moderator
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 3870
  • Reputation Power: 332
  • Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!
  • (shop) klar.slotrepair@gmail.com
Re: Bally S6000 23 error HELP!!!!
« Reply #9 on: September 24, 2018, 06:19:27 pm »
Can you coin up with the pseudo coin button on the coin optic board below the coin comparator?
Logged
Let them that don't want any, have memories of not getting any.

Offline Sunrise Side

  • Sr NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 3226
  • Reputation Power: 212
  • Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!
  • Gender: Male
Re: Bally S6000 23 error HELP!!!!
« Reply #10 on: September 25, 2018, 05:59:53 am »
Have you cleaned the Prizm on the backside of the coin optics bracket? If you remove it, pay close attention to the positioning and use only water to clean it. Also could try holding in the reset button for 30 seconds and then close the door.
Logged

Offline pbwizard25

  • Contributing NLG Member
  • NLG Member 251 to 500 Posts
  • *
  • Posts: 410
  • Reputation Power: 31
  • pbwizard25 Is working their way up.pbwizard25 Is working their way up.pbwizard25 Is working their way up.
  • Gender: Male
  • NLG
Re: Bally S6000 23 error HELP!!!!
« Reply #11 on: September 25, 2018, 06:33:16 am »
Are you doing a complete clear. Not sure if full or partial will do it, I only do complete clears.
Logged
Pages: [1]   Go Up
« previous next »
 
If you find this site helpful, please consider becoming a Contributing NLG Member with a monthly subscription to help cover the cost of pizza, coffee, aspirin, hosting, and bandwidth.
Contributing Members: get unlimited personal messages, can save topics and replies as drafts,
can post to the Classified ads, get unlimited access to the downloads, and also get this minty badge:



**Subscription Link** (Click Here) **Subscription Link**


           
If you would rather remain anonymous Thank You or just want to help support the site, please use this "make a donation" button:




From your entire NLG staff, thank you for supporting NLG.

New Life Games LLC 1788 HIGHWAY 95 UNIT 30 BULLHEAD CITY AZ 86442



Newlifegames.com     Newlifegames.net     Newlifegames.org

Newlifegame.com     Newlifegame.net     Newlifegame.org    Newlifegames.us

   New Life Games     NewLifeGames  NLG

 We Bring new Life to old Games    1-888-NLG-SLOTS

Are all Copyright and Trademarks of New Life Games LLC 1992 - 2022


FAIR USE NOTICE:


This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml
If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.




The NewLifeGames.com website is optimized for use with Firefox and a minimum screen resolution of 1600 x 900 pixels.

SimplePortal 2.3.5 © 2008-2012, SimplePortal